120V AC, 60Hz

13W max.

4 kg (8.8 lbs)

420(W) x 44(H) x 350(D) mm (16-9/16" x 1-3/4" x 13-3/4")

+5℃ to + 40℃ (41℉ ~ 104℉)

95 % max.

Ethernet 10Base-T/100Base-TX, RJ-11

TCP, IP, UDP, ICMP, HTTP, FTP, SMTP, H323

Video input 1-5, composite/1V[p-p]/75Ω BNC
Video input 1-4 is for combination camera control signal multiplexed.
Video input 5 is AUX.

Video input 1-5, composite/1V[p-p]/75Ω BNC
Video input 1-4 is loop through.
Video input 5 is Monitor/spot.(selected video input)
Transmitter mode : Video output 5 is selected video input 1-4.
Receiver mode : Video output 5 is selected video input 1-5.
(Menu provided/no menu provided selected [MODE] dip-sw No.8)

H.261, 0 to 1Mbps (0/16/32/64/128/256/384/512/768/1,024kbps)
No.of processed picture elements CIF:352 x 288 max.30fps
JPEG mode 640 x 480 (VGA / QVGA)

Audio input x 1, audio out x1, RCA pin jack
Audio input : -10dB Hi-z unbalance 47kΩ
Audio output : -10dB Hi-z unbalance 300Ω

G.711 : audio band 3.4kHz or no sound

RS-232C(D-Sub 9-pin mode) or 4-wire RS-485(RJ-11 connector),
Baud rate=4,800bps / 9,600bps / 19,200bps, Data length=7-bit / 8-bit
Stop=1-bit / 2-bit, parity=NONE / ODD / EVEN
RS-232C or RS-485 changeover by [SETUP] dip switches on the rear [NO.4]

D-Sub 25-pin female, Input x 8 (make-contact),
Output x 8 (open collector output)
Forced (line) disconnection input x 1 (make-contact)
Clock adjust signal input x 1 (make-contact)
Mid-communication output x 1 (open collector output)
parallel data strobe output x 1 (open collector output),
+12V output (50mA max.)

D-Sub 25-pin female, sensor input x 8 (make contact)

Trigger output x 8 (open collector output) 

RS-232C (D-Sub 9-pin male) or 4-wire RS-485 (RJ-11 connector),
Baud rate=4,800bps / 9,600bps / 19,200bps, Data length=9-bit (fixed),
Stop=1-bit (fixed), parity = NONE (fixed)
RS-232C or RS-485 changeover by [MODE] dip switches on the front [No.9]

RJ-11 modular port

ON/OFF (Set with setting dip switches on the rear)

Straight / crossover (Set with setting dip switches on the rear)